HYDEN 4 color low-speed Dry-Offset Presses

4080 MiniPrinter

The Hyden 4080 MiniPrinter is a compact low speed four color Dry Offset press. Specially designed for printing on Injection molded and Thermoformed plastics disposable containers, used in food and beverage packaging, this machine has all the features and build quality of our standard range of printers at a low equipment cost. The 4080 MiniPrinter has been particularly manufactured for low printing volumes and small batch sizes.

The 4080 MiniPrinter is a fully automatic 4 color press that gives excellent print quality while maintaining tight color register. It uses solvent based inks and is equipped with a heat drying conveyor for curing printed containers. A re-stacking system allows easy and convenient operation. The press has a small and compact footprint requiring a low operating area and is extremely easy to install and set-up.

The 4080 MiniPrinter is manufactured by precise machining techniques and workmanship and has a solid build. The TESLA Series 408 Control System is simple and easy to maintain and is made user serviceable and therefore does not require any specialised maintenance. Comprehensive instructions and maintenance manuals are provided with the equipment to assist set-up and maintenance.

The 4080 MiniPrinter gives an excellent print reproduction with consistent results. This is becaiuse it has been manufactured with the same Care, Dedication and Precision that goes into the build of our most advanced presses. No compromises are made in the materials or workmanship that go into the build. This make the equipment worthy of a long service life at a low maintenance cost. When installed on your shop floor you will join a large base of satisfied customers, because Customer Satisfaction is what all of us at Hyden really care about.

Technical Specification

Standard Features

Automated container in-feed

Heat curing through Ceramic heaters

Proportional heater control

Automatic re-stacking of printed containers

Optional Features

Integration of Corona Treater


Re-configuration to print on Blow molded containers

Re-configuration to print on cosmetic/pharma tubes

Product suitability will need to be confirmed

Offset unit 4 color modular
Min/Max rim diameter 50/80 mm
Max print width 125 mm
Max print length 235 mm
Min/Max taper 2/7 degrees
Press speed 80 CPM
Power utility 5.5 Kw 425V 50Hz
Air utility 300 Lit/min @ 5 bar
Footprint (L/W/H) 5200 x 1500 x 2200 mm